.jpg?imageView2/1/w/350/h/350)
.jpg?imageView2/1/w/350/h/350)
X&Y axis use linear guide,Y use boxs way
Suitbale for complex machining
24T Disk Tool Magazine
Integrated Solution Provider
- FEA Design for optimal stress distribution
- Meehanite cast is tempered for stress relief
- Pretension on all axis to minimize the thermal distortion
- Main Components used
- Internationl compatibility
- Diversified option
- Carousel type 20T
- Disc type 24T
- MITSUBISHI,FANUC and SIEMENS
- Re-developed control system
- Diversified options for customer’s selection
- Advanced equipment and experienced personnel for QC
- Every machine must go through hundreds of testing and inspection before delivery
- Dynamic balance testing for key parts such as spindle
- Machined parts must be tested to check the machine precision
.jpg)
| Description | T-8L | ||
| Table | Size | mm | 1000*500 |
| T-Slot | 5-18*90 | ||
| Max. LoadingCapacity | kg | 450 | |
| Travels | X/Y/Z Axis | mm | 800/500/500 |
| Distance from Spindle nose to table surface | mm | 160-660 | |
| Spindle | Spindle taper | BT-40 | |
| Max. Speed | rpm | 8000 | |
| SpindleMotor | kw | 11 | |
| Feedrate | Rapid Traves(X/Y/Z) | m/min | 24/24/16 |
| ATC | Tool Storage Capacity | T | 24T |
| Max.Tool Diameter(with/without adjacent tool) | mm | 75/150 | |
| Max.Tool Length | mm | 300 | |
| Max.Tool Weight | kg | 8 | |
| Accurancy | Positioning | mm | 0.005 |
| Repeating | mm | 0.003 | |
| Power Supply | Motor (X/Y/Z) | kw | 3.0/3.0/3.0 |
| Total Power Capacity | kva | 15 | |
| Machine Dimension | Size(L*W*H) | mm | 2690*2380*2740 |
| Weight | kg | 5375 | |
| Standard | Optional | |
| Full enclosure guard | FANUC or SIMENS system | |
| 3 Axes telescopic cover | Spindle coolant system | |
| Air blasting through spindle | Air conditioner for electric cabinet | |
| Operation status lamp | The fourth axis | |
| Working lamp | Chip Remover | |
| MPG handwheel | ||
| RS232 interference | ||
| Automatic lubrication system | ||
| Turret Tool magazine with 24 stations | ||
| Heat exchanger for electric cabinet | ||
| Cutting fluid cooling system | ||
| Mitsubishi control system | ||
| Rear chip flushing system | ||
| Tool box with tools, leveling bolts and pads | ||
| Operation and programming manual | ||
Especially Suitable for machining parts in the industry like Automobile, Mold&Die and Parts machining
Parts machining
