T-V856S  Vertical Machining Center
  • T-V856S  Vertical Machining Center
  • T-V856S  Vertical Machining Center
  • T-V856S  Vertical Machining Center
  • T-V856S  Vertical Machining Center

T-V856S Vertical Machining Center

T-V856S line rail type vertical machining center is a small and medium size machine tool.

Get a quote

Product Characteristics 

T-V856S line rail type vertical machining center is a small and medium size machine tool, the workpiece can be automatically and continuously finished after a clamping milling, drilling, boring, expanding, reaming, countersinking, tapping and other processes, the machine tool is suitable for small and medium-sized box type, plate type, disk type, valve type, shell type, mold and other complex parts of multi-species of small and medium batch processing. The machine adopts high precision linear rail and ball screw, the machine has better dynamic responsiveness, can achieve high speed cutting, low speed without crawling, in precision parts, 5G products, hardware, auto parts, medical equipment industry is widely used.

  • The structure of the whole machine is fixed column type, cross slide structure. The machine body adopts a large solid base and high rigidity of large span herringbone column, so that the high-speed cutting does not vibrate and does not deform.
  • All the big parts of the foundation are made of high quality resin sand molding and high strength cast iron material casting, so that the machine tool can get high rigidity and stable accuracy.
  • Three axes guide rail adopts roller line rail to carry, high rigidity, low friction and low noise.
  • C3 grade filament rod with pre-stretch structure to eliminate partial thermal extension and self-lubrication for filament rod bearings to extend bearing life.
  • The tool magazine adopts Taikan's 24-blade arm type tool magazine with reliable quality and stable performance.
  • The spindle adopts Taikan's high speed spindle unit with BT40-12000r/min direct link head. The front end of the spindle adopts labyrinth design with air curtain protection to prevent cutting fluid from entering the spindle bearing.
  • Equipped with volumetric and forced lubrication system to ensure good lubrication of all moving parts of the machine.
  • Machine tool chip removal standard with both sides of the slope after the flushing water chip removal, water tank rear design, automation, humane, high efficiency. Double-layer water tank filtration system structure, providing good cutting fluid for workpiece processing.
  • Equipped with high performance Mitsubishi M80B CNC system to ensure the stability of the machine control, but also to ensure the user requirements of CNC machining functions and auxiliary functions.

Application Area 

Suitable for all types IT parts high belt processing, hardware parts processing, auto parts processing ,3 C industrial parts processing, aerospace field parts processing, other precision parts processing.


Working Environment

(1) Three-phase AC power supply :380 V±5%;50 HzV±1 Hz, main power line 8 mm² or larger, ground wire 8 or larger.
(2) Ambient temperature :8~40 Cº.
(3) Relative humidity :≤80 per cent.
(4) Keep away from light source, vibration source and heat source, keep away from high frequency generator, discharge motive, welding machine, etc., avoid electrical interference to make machine tool NC system malfunction.


Product Parameters 


Items Unit T-V856S
Processing Travel size(X-axis) mm 800
Travel size(Y-axis) mm 550
Travel size(Z axis) mm 600
Distance from spindle nose to table mm 125~725
Spindle center mm 590
Work table Work table size mm 1000*500
Max.load Kg 500
T-slot (number-width * spacing) mm 5-18*100
Spindle Motor power (rated/short time) kw 7.5/11
Motor torque (rated/short time) N.m 35.8/70
Rotational speed range r/min 50~12000(Direct Connect)
Spindle diameter mm φ150
Toolholder specifications / BT40
Spigot specifications / P40T-I(MAS403)
Guide Rail X-axis mm 2-35Rollers
Y-axis mm 2-45Rollers
Z-axis mm 2-45Rollers
Drive Ball screw X/Y/Z mm 4016/4016/4016
Motor power X/Y/Z kw 2.0/2.0/3.0
Speed Cutting feed speed range mm/min 1-10000
X, Y, Z axis fast moving speed m/min 48/48/48
Machine accuracy Positioning accuracy (X/Y/Z) mm 0.008
Repeat positioning accuracy (X/Y/Z) mm 0.005
Tool Storage Tool capacity Pieces 24
Tool weight  kg 7
Tool length mm 250
Maximum diameter (Full knife/adjacent empty knife) mm Φ75/Φ150
the others Control system / Mitsubishi M80B
Air Source Flow L/min ≥280(ANR)
Air pressure MPa 0.5~0.8
Equipment capacity KVA 25
Cooling tank capacity L 300
Machine dimensions (L*W*H) mm 2240*3121*3026
Machine weight (approx.) Kg 4600

Company Profile

vertical machining center

Certificate Display




Why Choose Us

1. A professional manufacturer of machine tools and automation products.

2. Three production bases: Shenzhen, Suzhou and Yibin, ensuring a monthly production capacity of 2,000 units.

3. A high-tech listed company.

4. A professional R & D team of 500 talents.

5. Series of products with stable performance such as CNC lathes, turning and milling machine tools, vertical machining centers, horizontal machining centers, gantry machining centers, centering machines and so on.

6. A professional global  technical service team.

7. A stable supply chain system.

     After years of development, we has become the leading intelligent equipment manufacturing enterprises in China. The company is headquartered in Bao’an District, Shenzhen City, with three modern production bases, with a factory building area of more than 100000 square meters ,2000 employees, and more than 1800 machines per month. As a national high-tech enterprise, the company has a professional R & D team, products with independent intellectual property rights.

     Looking forward to the future, the company will carry forward the spirit of "we have always worked hard to be better".